Select Page

Non-Drip Enamel

Medal Premium Non-Drip Enamel is a hardwearing semi-gloss polyurethane-based non-drip paint, which is suitable for decorating and protecting all interior and exterior surfaces. This product is ideal for use on kitchen and bathroom walls, cupboards, trim and any other areas where a durable semi -gloss finish is required.

Semi-gloss Finish

Semi-gloss Finish

Application: Exterior

Spread Rate: 8-10 m2 per litre
Packaging: 1L & 5L

COLOUR RANGE

White

Aged Bronze

Disclaimer: Colours displayed on screen may vary from actual Medal Paints colours.

PRODUCT APPLICATION
  • Brush or Mohair Roller
  • Do not stir or shake container before use. If stirred accidentally, leave paint to stand for 4 hours to regain its correct consistency again
  • Do not use thinners
  • Allow overnight drying
  • Clean tools with Mineral Turpentine
PRODUCT BENEFITS
  • Non-drip formulation

  • Water & steam resistant

  • Fully washable

  • Quick drying

PRODUCT USES
  • New and previously painted surfaces made from cement plaster, concrete, brickwork and gypsum plaster

  • Asbestos/fibre cement boards

  • Primed metal & wooden surfaces

  • Ideal for kitchens, bathrooms and trims

DRYING TIME

Touch Dry: 40 Min – 1 Hour
Hard Dry: 16 Hours
Recoating Time: 16 Hours

SPREAD RATE

8-10 m2 per litre

DATA SHEET

PAINT CALCULATOR

To determine how many litres of paint you will require for a specific job or project.

All you need to do is fill in the following: the total area you would like to paint in square metres and the average spread rate of the desired paint you will be using here.

Total Area (m2)
Spread Rate (m2/L)
Pack Size (L)
Total amount of paint required for 1 coat:
Total amount of paint required for 2 coats:
Number of paint cans required: