Medal Acrylotex Four in One Pva is a good quality fine texture paint, suitable for exterior surfaces. This product is a primer and flexible topcoat all in one and has been developed with bonding properties to adhere to poor plaster surfaces, it also has excellent filling and water-resistant properties. It can be applied to a variety of surfaces where a matt fine texture finish is required.
Application: Interior & Exterior
Spread Rate: 6-8 m2 per litre
Packaging: 5L & 20L
Disclaimer: Colours displayed on screen may vary from actual Medal Paints colours.
Stir the contents thoroughly before use. This product should be applied without thinning.
For colour consistency, ensure that batch numbers are the same on all cans.
Apply this product with a paintbrush or (furpile / lambswool) paint roller and allow +/- 4 hours drying time between coats.
Allow paint to cure (hard dry) for 7 days before attempting to clean the surface.
Do not apply when rain is imminent.
Clean tools (brushes & rollers) with water immediately after use.
Excellent Bonding Properties
Covers Hairline Cracks
UV and Water resistant
Good Hiding Power
7 Year Guarantee
New and previously painted surfaces made from Cement Plaster, Concrete, Brickwork & Primed Gypsum Plaster.
Asbestos/Fibre Cement Fascias & Ceiling Boards.
Ideal solution for rough cast walls.
Touch Dry: 30 Minutes – 1 Hour
Hard Dry: 4 Hours
Recoating Time: 4 Hours
6-8 m2 per litre
To determine how many litres of paint you will require for a specific job or project.
All you need to do is fill in the following: the total area you would like to paint in square metres and the average spread rate of the desired paint you will be using here.